By continuing to browse our site you agree to our use of data and cookies.Tell me more | Cookie Preferences Partially Powered By Products Found At Lampwrights.com Log In Error Go to Western Digital's RMA site and see if your drive is in warranty, if so you can send it back for a repair/exchange. The day you stop learning, is the day you die! Check cabling and retest. have a peek at this web-site
Several instances of track information could not be found. Replace the drive if the error repeats. One instance of information on data positioning and location could not be found. There may be repairable media errors on a platter. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
Replace Drive 204 DRM Attribute too low after media scan. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Re-test Drive 143 RANDOM SEEK ERROR Error encountered during random seek.
This may be due to a media or read/write error. This may be due to a defect with the drive or a bad connection. to report if a drive has failed, it must be enabled as a system option. Dlgdiag Code = 07 Failed Read Test Element, Failure 97 If the errors … use the second link above to find the proper utility, or contact WD tech support if that fails… Data Lifeguard Diagnostic for Windows is a simple, …
Replace your cable and retest the drive. 20 Delete Partitions Error When you think of it thoroughly, these will issues will actually assist you know if the computer is having some problems and needs some care. Thats why Im thinking the storage disks on the drive may be okay and the controller board might be screwy. http://www.techsupportforum.com/forums/f16/solved-what-is-error-status-code-0132-from-data-lifeguard-diagnostics-537960.html sylvester Black Belt Posts: 559Joined: Tue Jul 27, 2004 4:17 am Top Reply with quote by Copper » Fri Feb 08, 2008 1:33 pm the drive failed for some reason.
Retest. Wd Bad Sector Repair Tool Please re-test the drive with Data Lifeguard. I guess that one isn't it. Retest after checking the connections.
Re-Test Drive 106 Track 0 Error Track 0 was not properly detected. http://www.motherboards.org/forums/viewtopic.php?t=104651 Return to Top Data Lifeguard Tools 5.22 for DOS Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. Delete Partitions Error Wd Check cabling and retest. Western Digital Error Code 0007 Retest after checking the connections.
Check cabling and retest. http://softwarenegozi.net/western-digital/western-digital-error-status-code-0132.html Replace Drive 217 2-9 SERVO Errors SERVO 2-9. gulp3507-29-05, 08:52 PMI got a problem: my computer won't start into windows. * wait a minute is that a problem? :D* First the specs... failure and errors Warranty policy and online warranty services for WD products Processing... Status Code = 07 (failed Read Test Element), Failure Checkpoint = 97
Retest after checking the connections. If the error repeats, replace the drive. So what do I do? Source Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility.
But don't indicate you did other than test with their diagnostics. Wd My Passport Smart Status Failed I've tried this drive on 2 different computers, both with current BIOS' installed, on a controller card, and off, on primary and secondary IDE channels, Master, Slave, and cable select all Re-test Drive 220 Drive is Locked Security feature of the drive reports locked status.
then the hard drive spins up, then clicks a few times (louder than usual drive access, usually 3 clicks) then the drive spins down and starts trying to access the floppy If ECC occurs, use Data Lifeguard repair option for additional error correction. The same utility and the original code used to lock the drive are necessary to unlock this drive. Too Many Bad Sectors Detected Fix The drive has to be replaced.
Replace Drive 226 Sector Relocation Error Failure to relocate a sector during drive repair. Non-WD drives are not supported. Drive should be replaced. have a peek here It may also be due to a defective connection.
The drive may not have been accessed properly possibly due to a bad connection. Check cable and retest. Keep in mind that if you mess the whole thing up you may have 2 dead drives... #6 Cheetah8799, May 28, 2004 nanaki333 Diamond Member Joined: Sep 14, 2002 Messages: Replace the drive if the error repeats.
Got an Error/Status code: 0132.
© Copyright 2017 softwarenegozi.net. All rights reserved.