Replace the drive if the error repeats. Please see Answer ID 981: How to physically install, set jumper settings, and set up a Serial ATA, EIDE, or SSD drive in Windows 7, Vista, XP, and 2000 for proper This may be due to a media or read error. Xyruz_Ramirez 2016-02-01 11:12:44 UTC #10 i can ping the IP thats shows on the cloud and the color of the rear light is blue SectorGZ 2016-02-01 11:16:12 UTC #11 The color http://softwarenegozi.net/western-digital/western-digital-red-error.html
This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Resetting does not erase your files. The drive is defect free. An onboard defect counter has determined the drive has too many errors and should be replaced. https://support.wdc.com/knowledgebase/answer.aspx?ID=13865
It also may be due to a defective connection. Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. lets try re-setting the My Cloud and start from scratch. Ten or more instances of track information could not be found.
Check cabling & retest. Retest after checking the connections. Track 0 on the drive must be accessed to perform parts of various internal tests. Wd Drive Utilities Re-test with appropriate diagnostic utility 0001 - 0008, 0015 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command.
Re-Test Drive 106 Track 0 Error Track 0 was not properly detected. Replace Drive 226 Sector Relocation Error Failure to relocate a sector during drive repair. Problem: When formatting or partitioning a WD internal drive, external drive, or Solid State drive an error occurs stating the drive cannot be dismounted. https://support.wdc.com/knowledgebase/answer.aspx?ID=8575 Drive should be replaced.
Replace Drive If an error code is encountered that is not in the list above, please Contact Us for additional troubleshooting. Wd Support Several instances of information on data positioning and location could not be found. Version 4.12 for older drives and version 5.00 for current drives. This may be an anomaly.
ECC is a hardware correction technique that corrects errors. The drive should now be defect free. Wd External Drive Format Failed Replace the drive if the error repeats. Wd Quick Formatter Replace the drive if the error repeats.
This may be due to a defect with the drive or a bad connection. http://softwarenegozi.net/western-digital/western-digital-error-beep.html Retest after checking the connections. Re-Test Drive 4 Open Drive Failure Cannot communicate with drive. Replace Drive 223 Errors Repaired Errors found, but have been repaired successfully. Data Lifeguard Diagnostics For Windows
Ultra ATA and Serial ATA cables are available at most computer stores. The same utility and the original code used to lock the drive are necessary to unlock this drive. Re-test Drive 142 TK-TK SEEK ERROR Error encountered during track-to-track seek. Source There are too many errors detected on this drive to be repaired.
Re-Test Drive 112 IRQ Timeout Interrupt ReQuest Interrupt signal not received. Wd Smartware Private IP address spaces were originally defined in an effort to delay IPv4 address exhaustion, but they are also a feature of IPv6. If the hard drive or data cable is physically damaged or defective.
Please re-test the drive with Data Lifeguard. Replace the drive if the repair fails. Try formatting or partitioning the drive using another USB/FireWire/eSATA cable and on another computer if possible. Testdisk Replace the drive if the error repeats.
Once open, drag the mapped_drives.bat file into the Startup folder. Retest after checking the connections. If the error repeats, replace the drive. http://softwarenegozi.net/western-digital/western-digital-green-2tb-error.html This may be due to a defect with the drive or a bad connection.
Re-Test Drive 111 DIAG COMMAND ERROR The drive did not properly respond to test commands. Replace the drive if the error repeats. This is the pretest initialization code which indicates a drive is ready to be tested, but has not yet been tested. This error occurs when the drive could not read Track Zero.
Replace Drive 215 2-9 IDNF Errors Identified Data Not Found (IDNF) 2-9. Drive should be replaced. Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. Sometimes this can be caused by other devices on your network using the drive (such as another computer, media player, or tablet).
Replace the drive. Retest after checking connections. Enter the following information into the file (include the quotation marks): @echo off net use drive_letter: "\\device_name\share" /user:username password or net use drive_letter: "\\device_IP\share" /user:username password For example: @echo off net You can also connect the hard drive to another computer system to perform the format.
© Copyright 2017 softwarenegozi.net. All rights reserved.